[Digmer]

Sliding gates are more and more often found on private properties today - this solution is much more convenient than swing gates, because it does not block the driveway as they do.


However, they also have their drawbacks, because they require a lot of space for installation, which makes them suitable only for larger properties. In addition, they are very expensive, especially the automatic ones. Here is a collection of information about modern sliding gates. You can also find the cost of services on this website https://bestgaragedoorrepairandservice.com/seal-beach/

Sliding gates – manual or automatic?

Manual sliding gates are a choice for people with a smaller budget who cannot afford automatic ones. However, their operation will be inconvenient and tiring in the long run. Moving the wing requires a considerable amount of force. Automatic gates, i.e. those that have a special drive for sliding gates powered by electricity, are a more expensive solution, but more convenient than manual gates.


Such gates are controlled by a remote control, so you don't even have to get out of the car or leave the house to open or close them. Sliding gates are installed on relatively large plots, with a minimum width of such width that the slid can fit entirely on the inside of the fence on the side of our choice. On small plots, it is better to stay with swing gates (gate type).

Sliding gates – design and parameters

The basis of the sliding gate structure is a massive bottom rail. On it, there are rollers that guide the gate. On both sides of the gate, there are posts that are responsible for the movement and keeping the gate vertical. The width of the door leaves can be chosen depending on our needs and convenience. Sometimes the gates are up to 20 meters wide. According to the current regulations on entrance gates, they should not be narrower than 2.4 meters, but most users choose those with a width of 3 meters and more.


Such a width ensures comfortable access to the property. When choosing the width of the gate, you should take into account what cars will pass through it. For ordinary cars, the gate does not have to be very wide, but if you need a truck or agricultural tractor to pass through the gate, the gate must be much wider. It is also obvious that a wicket for entering on foot must also be placed at the entrance gate. It is known that it must be located on the side where the gate leaf does not move. Otherwise, it will not be functional.

Rail-mounted and self-supporting gates

There are two types of sliding gates – rail gates and self-supporting gates. In the gate on the rail, the castors are placed on the bottom beam. In the case of a self-supporting gate, the rollers are placed in the gate post and the rail is fixed directly in the ground. This option is definitely better, because various dirt such as sand, leaves or snow in winter very often accumulate in the rail. Unfortunately, in order for the gate to work properly, they need to be removed regularly.




Automation for sliding gates

Until recently, automatic motorized sliding gates were mainly found in industrial areas or public places. Now they are more and more often chosen by owners of larger private properties. However, people often decide to buy a gate opener long after buying the gate itself. It is possible, but when choosing a drive, you need to pay attention to several important factors. Actuators must be adapted to the weight of the door, the frequency of its use, as well as its size. However, it is best to buy a gate with automation right away at the stage of building the house and fencing the property. The installation of such a gate requires running wires connecting it to the power source under the ground, which would make it necessary to dig the plot again.

Aesthetics of a sliding gate

The entrance gate and fence are the first thing that people see when passing by the property or guests visiting us. Therefore, it can be said that the gate is the business card of the property owner. Therefore, when choosing it, you should also pay attention to its appearance. The gate should match the fence, as well as the appearance of the property and house. The best choice will be elegant and modern wrought iron gates. Blacksmiths are not only involved in the production of horseshoes. They can create real miracles, including unusual gates. Unfortunately, the disadvantage of wrought iron gates is a very high price.


Instead, you can opt for cheaper prefabricated gates, but they will not be as elegant as forged ones. Despite the high price, wrought iron gates are really popular. They can be really original and original. They are usually made to order by the customer, according to his individual expectations. You can order forged doors with a wide variety of designs and in a modern or classic design.


They are manufactured to order, so when deciding to do so, you need to remember that the waiting time for their production will be quite long. Sliding gates are to serve us for many years. We have four seasons that are characterized by different weather conditions. The door must therefore be durable and resistant to adverse conditions such as rain, snow or frost. Therefore, they are most often made of galvanized metal or pressure-impregnated wood. Usually, the most durable types of wood are used here, i.e. oak or exotic species. These are the gates you should choose if you want them to serve you for many years in an unchanged condition.

Prices and models of entrance gates

A modern metal sliding gate equipped with a gate operator costs a minimum of PLN 5,000. In addition, the installation costs from 500 to 1000 PLN. The cheapest gates, without a drive, can be purchased for as little as PLN 1500. Unlike the cheap ones, the most exclusive and modern forged gates, made to order, can cost up to about PLN 15,000. All because these are doors made to a high standard and their service life is very long. For a high-quality motorized sliding gate you have to pay about 6-7,000 PLN and you can enjoy it for many years. Here are some examples of sliding gate models:


Betafence entrance gate – it is a gate with dimensions of 350/120 cm, equipped with a gate drive with optimal power, a four-channel remote control, as well as photocells for gates and a warning lamp. It is a gate made of steel profiles galvanized on both sides and with a palisade filling. It costs 5154 PLN, without assembly;


GADiP entrance gate – has dimensions of 500/175 cm and has an electromechanical drive. It is a gate made of steel, and the posts are made of clinker bricks. Price without assembly: 6472 PLN;


gate on a Betafence rail – a sliding gate with dimensions of 500/120 cm. It is equipped with an electric mechanism for the sliding gate. Its frame is made of welded steel profiles galvanized on both sides. Price without assembly: PLN 10,647;


modern Betafenc e entrance gate – it is a self-supporting gate with dimensions of 300/100 cm. It has an electric drive and Bekamatic automation. The frame is also made of galvanized steel profiles on both sides. The price of this gate is very high: PLN 13,334, without installation;


Wiśniowski entrance gate – it is a self-supporting sliding gate with dimensions of 300/145 cm. It has an Awso 2000 electric drive, which is enclosed in a pole. The frame is made of steel, it is protected against corrosion with hot-dip galvanizing and powder coating. Price: 3990 PLN, without assembly;


Other well-known manufacturers of entrance gates and gate drives and other mounting elements include Hormann, Came, Nice and many others. It is worth choosing the offers of the most popular manufacturers despite the high prices. Cheap doors and components may not perform their role properly and wear out quickly.

Sliding gates with photocells

A very interesting element that is worth installing for gates are photocells for entrance gates. These are electronic devices that ensure full safety of using the door. They mean that if an obstacle gets between the door leaves, it will be automatically blocked and will not close. Thanks to this, it is possible to avoid getting caught in the gate, which is especially the risk of children or animals carelessly passing through the gate, which can get there unaware of the danger. With a photocell, a tragedy can be avoided because it produces an infrared beam that is interrupted by an obstacle and the gate stops. More than one photocell can be installed on one door. It should be at least two so that you can enjoy the safety of using the gate in one hundred percent.




Remote control automatic gates

Automatic gates with an electric drive are controlled by a special remote control. This allows you to conveniently open and close the gate while staying in the car or at home. Simply press a button to open or close the door. Operating the gate is so simple that even a child can do it. However, in order for the gate to work properly, it must be properly installed. You can do it yourself, but it is better to use the services of a specialist. A good electrician will be useful for electric gates to help bring a power source to the gate.

What if the power goes out?

It may happen that there is a power outage. Just like in a house, the lights go out and the appliances stop working, and the gate will stop working. What if you come home or want to leave? In order not to worry about such a situation, it is worth choosing a drive that also has an additional key lock. This will allow you to open and close the door in the event of a sudden power outage. This will also help you avoid a situation where the power suddenly goes out when opening or closing the door and thus it will remain open. You will be able to lock it with the key. As you can see, modern doors are equipped with various technologies that increase the comfort and safety of use. No wonder that they are becoming more and more popular and more often chosen than traditional, manually operated gates.

[Noellsoon]

На официальном сайте букмекерской конторы